Shanghai Sunland Industrial Co., Ltd is the top manufacturer of Personal Protect Equipment in China, with 20 years’experience. We are the Chinese government appointed manufacturer for government power,personal protection equipment , medical instruments,construction industry, etc. All the products get the CE, ANSI and related Industry Certificates. All our safety helmets use the top-quality raw material without any recycling material.
winter safety boots
We provide exclusive customization of the products logo, using advanced printing technology and technology, not suitable for fading, solid and firm, scratch-proof and anti-smashing, and suitable for various scenes such as construction, mining, warehouse, inspection, etc. Our goal is to satisfy your needs. Demand, do your best.
Professional team work and production line which can make nice quality in short time.
Address：No. 3888, Hutai Road, Baoshan District, Shanghai, China
A ,safety helmet should, be replaced when or before its protective capacity has been significantly reduced. The manufacturer of the ,helmet, is the source of guidance when deciding on a replacement policy. 3 years from manufacture is a widely accepted lifetime for ,helmets,.
NOTE—,Helmets, required for use in underground mines shall have no metal parts made from aluminium or magnesium or their alloys. 4 SIZES 4.1. ,Helmets, shall be in sizes 520, 530, 540, 550, 560, 570, 580, 590 and 600 mm. These sizes may be generated out of one or more shells or one or more headbands.
Helmets, : a road ,safety, manual for decision-makers and practitioners. 1. ... injuries in industrialized countries that have been active in road ,safety,. The use of seat-,belts,, ,helmets, and child restraints, the report showed, ... of the capacity for an appropriate medical response to ,be provided, following a crash.
The body ,belt, or lifeline D-ring ,should, be arranged at the back of the worker. The wearer of the ,safety belt should, not tie off below the waist level (to prevent turning down the head). A window cleaner’s ,belt, length is limited to 8 ft (2.5m). The chest ,belt, is worn loosely to allow smooth breathing.
Head Protection: Bump Caps ,and Safety Helmets,. Regulation 4 of the Personal Protection Equipment at Work Regulations (1992) and the Construction (Head Protection) Regulations (1989) requires that Head Protection be used in hazardous areas. A full assessment of the hazards must be undertaken to determine the suitability of Head Protection supplied.
This Welding ,Helmet, is certified to be used only in conjunction with a ,Safety Helmet,, and ,should, not be used independently. It is ,provided,, on request, by IR 5 or IR 11 Lens sandwiched between two protective lens made of clear high impact resistant Polycarbonate, conforming to EN 166 and ANSI Z87.1. Conforms to EN 175 and ANSI Z 87.1
Safety, check and maintenance. Before use make sure that the ,helmet, has no previous damage. Look for cracks, dents or other signs of wear. ,Helmets, with cracks, deformations and/or perforations ,should, be taken out of service and be replaced. If a ,safety helmet, has suffered an impact, replace it! Even if the ,helmet, shows no visible signs of damage.
Personal protective equipment (PPE) is protective clothing, ,helmets,, goggles, or other garments or equipment designed to protect the wearer's body from injury or infection.The hazards addressed by protective equipment include physical, electrical, heat, chemicals, biohazards, and airborne particulate matter.Protective equipment may be worn for job-related occupational ,safety, and health ...